Floor Protection Board Seam Tape

Brown paper tape for the joints between temporary floor protection boards. Keep adhesive on the board faces while the finished floor stays beneath the protection.

Renovation and site protection

Connect the protection boards across the joint.

Temporary floor protection works best as a planned layout. This brown paper tape bridges adjacent board joints, helping the protection sheets stay together as decorating and interior work progress.

Discuss your application

Floor Protection Board Seam Tape application illustration
Application position and installation detail.
Purpose

Connect adjacent temporary protection boards

Position

Across the board seam, above the protected floor

Project inputs

Board surface, site duration and roll consumption

Construction and format

Material details for project selection

BackingKraft paper
Adhesive formatSingle-sided
Illustrated colourBrown
Width, thickness and roll lengthConfirm against board type and site requirement
Intended contact surfaceTemporary protection board

Send the protection board details and expected site conditions with your enquiry.

Floor Protection Board Seam Tape material detail
Product construction, shown up close.

Application planning

Where this product fits

For temporary floor protection layouts during painting, refurbishment and interior fit-out. Check adhesion on the protection board and inspect high-traffic joints as work proceeds.

  • Brown paper backing blends with kraft-faced protection boards.
  • Bridges straight board joints.
  • Single-sided adhesive application.
  • Roll format suits temporary protection layouts.
Floor Protection Board Seam Tape construction application illustration
Installation context.
Floor Protection Board Seam Tape placement detail illustration
Placement and assembly detail.

Site preparation

Plan the installation sequence

  1. Place the protection boards according to the protection-system guidance.
  2. Remove loose dust from the upper faces at each joint.
  3. Apply the tape centrally so it bonds to both boards.
  4. Press down and recheck seams during site use, especially where foot traffic turns or equipment crosses.

Procurement checklist

Send a clear project brief

Include the installation detail as well as the roll dimensions. This helps us review the proposed specification for your application.

  • Protection board type and face material
  • Board-joint layout and total seam length
  • Site conditions and expected duration
  • Target tape width, roll length, order volume and carton format

Selection questions

Useful answers before specifying

Can this tape be fixed straight onto the finished floor?

The intended position is on protection-board seams. Direct contact with timber, stone, paint or another sensitive finish needs a separately approved surface-specific tape and detail.

Is a waterproof or clean-removal duration stated?

No fixed duration or waterproofing rating is stated for this listing. Agree the required specification and check it against the actual protection system.

Discuss the detail. Define the roll.

Send your substrate information, target dimensions, estimated quantity and delivery destination. Final specifications and supply terms are confirmed through the enquiry process.

Request a project quote

Product and application images are illustrative. Confirm the selected construction against the proposed sample and technical information.

Reviews

There are no reviews yet.

Be the first to review “Floor Protection Board Seam Tape”

Your email address will not be published. Required fields are marked *

Scroll to Top