Exterior Plastering / Rough Facade / OEM Supply
Exterior Plastering Facade Cloth Tape for Rough Stucco
This exterior plastering facade cloth tape is an orange PE-laminated cloth tape with hot-melt adhesive for temporary masking on rough stucco, brick and concrete facades. Two thickness options are available: 170 +/- 10 microns and 230 +/- 10 microns. Unlike standard PE stucco tape, its cloth-backed construction is selected for hand tearing during plastering work on uneven exterior surfaces. It helps protect window and door frames from wet mortar and paint. Apply only to dry, low-dust contact areas and plan removal within the confirmed outdoor window of up to 30 days.
Replace this image with a verified jobsite photo showing orange tape protecting a window frame during plastering when available.
Why Facade Cloth Tape Fits Rough Exterior Stucco
Wet Mortar and Paint Protection
The PE-laminated backing helps block wet mortar and paint during temporary masking around frames and adjacent surfaces.
Hand-Tearable Cloth Construction
The cloth construction supports hand tearing, reducing the need for a knife during scaffold work.
Made for Rough Facade Masking
The tape is intended for masking on uneven exterior stucco, brick and concrete facades when the contact area is dry and free of heavy dust.
Orange for Removal Checks
The orange color makes masked areas easier to identify before the planned removal date.
Product Specifications
Specifications shown are product data. Confirm application conditions and removal timing for the selected order.
| Product Models | NKS-1735CTS-O and NKS-2335CTS-O |
|---|---|
| Color | Orange |
| Carrier | Polyethylene film laminated to cloth |
| Adhesive | Hot melt |
| Total Thickness | NKS-1735CTS-O: 170 +/- 10 microns; NKS-2335CTS-O: 230 +/- 10 microns |
| Initial Tack | NKS-1735CTS-O: ≥ 12 (#); NKS-2335CTS-O: ≥ 20 (#) |
| 180° Peel Adhesion to Stainless Steel Plate | NKS-1735CTS-O: ≥ 12 N/25 mm; NKS-2335CTS-O: ≥ 20 N/25 mm |
| Tensile Strength | ≥ 90 N/25 mm for both models |
| Elongation | ≥ 35% for both models |
| Temperature Resistance | 0°C to 60°C for both models |
| UV Resistance / Outdoor Removal | Up to 30 days; confirm the removal window for the selected formula and project condition |
| Storage | Original cartons, dry area, away from sunlight, 15-25°C |
| Shelf Life | 12 months |
Standard Ordering Sizes
| Roll Size | Rolls per Carton | Typical Use |
|---|---|---|
| 48 mm x 25 m | 24 rolls | Standard window-frame and door-trim masking |
| 48 mm x 50 m | 24 rolls | Longer straight masking runs |
| 75 mm x 25 m | 16 rolls | Wider coverage during plastering and facade work |
Removal and Surface Limits
- Plan removal within the confirmed outdoor window of up to 30 days. Do not extend the exposure period without confirming the selected formula and project condition.
- Do not use the initial-tack value for an exact adhesive comparison because the public test method and unit definition are not available.
- Do not substitute red PE stucco tape's 180-day outdoor removal specification for this product.
- For uncertain coatings or surface conditions, use a small test application before large-scale masking.
Exterior Plastering Masking on Rough Facades
Prepare the Rough Facade Contact Area
Before application, check that the uneven exterior stucco, brick or concrete contact area is dry and free of heavy dust. Press the tape along the window frame, door frame or adjacent masking edge before wet mortar or paint work begins.
Select the Required Width
Use the selected width according to the frame edge, trim area and required coverage. Include roll length, paper-core size and printing requirements in the order specification when applicable.
OEM and Custom Order Requirements
To confirm a suitable stucco duct tape specification, provide the project conditions and packaging requirements with your inquiry.
Roll and Core
State the required width, roll length, quantity and 50 mm or 38 mm paper-core requirement.
Project Conditions
State the substrate, planned masking period and expected removal date.
Branding and Delivery
State the destination port and whether printed paper cores or private-label requirements apply.
Procurement FAQ
How long should this stucco duct tape remain in place?
The product has up to 30-day UV resistance / outdoor removal. Confirm the selected formula and project condition, then remove within the applicable window.
Why is this tape suitable for scaffold work?
The cloth construction supports hand tearing, reducing the need for a knife during scaffold work.
Which roll sizes are available?
Standard sizes are 48 mm x 25 m, 48 mm x 50 m and 75 mm x 25 m. Corresponding carton quantities are 24, 24 and 16 rolls.
Can it be used on rough brick, concrete or stucco?
It is intended for masking on rough brick, concrete and stucco when the contact area is dry and free of heavy dust. Use a small test application if the surface condition is uncertain.
Request a Stucco Duct Tape Specification
Send your roll size, paper-core requirement, substrate, planned masking period, removal date, quantity, destination port and private-label requirements. We will confirm the available specification for your order.
